Shamrock Technologies, Inc.
(raw materials)Shamrock Technologies, Inc. - A 50% dispersion of Shamrock's S-111 anti-skinning agent in a soya vehicle. Prevents oxidative inks from drying too fast in the can, in the ink ducts and on the ink rollers during idle press time.
(raw materials)Shamrock Technologies, Inc. - A hydrophobic additive to control water pickup in inks. Used in lithographic inks.
(raw materials)Shamrock Technologies, Inc. - Hydrophobic additive that controls water pickup in lithographic inks.
(raw materials)Shamrock Technologies, Inc. - A hydrophobic additive that controls water pickup in lithographic inks. Because of its high viscosity it should impart little thinning effect to ink.
(raw materials)Shamrock Technologies, Inc. - A pH-buffer dispersion. The dispersion will lower the pH of the ink, which will prevent bleeding and water logging on an offset press.
(raw materials)Shamrock Technologies, Inc. - 38% active polyethylene wax compound in vegetable oil.
(raw materials)Shamrock Technologies, Inc. - 47% active polyethylene / PTFE wax compound in vegetable oil.
(raw materials)Shamrock Technologies, Inc. - A 50% ultrafine microcrystalline wax compound. Used in heat-set inks.
(raw materials)Shamrock Technologies, Inc. - An ultrafine microcrystalline / polytetrafluoroethylene wax compound. Used in heat-set lithographic inks.
(raw materials)Shamrock Technologies, Inc. - A 40% polyethylene wax in a universal lithographic system. Used in lithographic inks.
(raw materials)Shamrock Technologies, Inc. - An ultrafine microcrystalline wax compound fortified with polytetrafluoroethylene. Used in heat-set lithographic inks.
(raw materials)Shamrock Technologies, Inc. - A 32% polyethylene compound in linseed oil. Provides sheet-fed lithographic inks with excellent gloss, slip and rub resistance properties.
(raw materials)Shamrock Technologies, Inc. - A 32% polyethylene wax compound in linseed oil. Used in sheet-fed lithographic inks. Provides slip, and rub resistance.
(raw materials)Shamrock Technologies, Inc. - A 35% polyethylene/PTFE dispersion in TRPGDA for use in UV inks and coatings. Specially formulated to impart rub or slip properties to a variety of UV inks and coatings.
(raw materials)Shamrock Technologies, Inc. - A 50% polyethylene dispersion in tri-decylstearate for use in UV inks and coatings. Offers increased hardness, recoatability, taber abrasion resistance and anti-blocking.
(raw materials)Shamrock Technologies, Inc. - A 25% oxidized polyethylene wax dispersion in TRPGDA developed for UV inks and coatings. Provides slip and transit abrasion resistance, while maintaining gloss and clarity.
(raw materials)Shamrock Technologies, Inc. - A stable, 50% polytetrafluoroethylene dispersion in water. It offers excellent lubrication properties, and high slip and abrasion resistance in coatings. Used in metal, plastic, glass and paper coatings.
(raw materials)Shamrock Technologies, Inc. - A special micronized PTFE grade for use in powder coatings. It may be used alone or in combination with other waxes to maximize abrasion resistance and slip (lubricity) without affecting the surface profile of the finished coating.
(raw materials)Shamrock Technologies, Inc. - A stable 50% dispersion of micronized polytetrafluoroethylene in a universal lithographic system. Used in heat-set lithographic inks. Can be combined with polyethylene to enhance abrasion resistance.
(raw materials)Shamrock Technologies, Inc. - A blend of low molecular weight polyethylene and polytetrafluoroethylene. Used in solvent-based and water-based inks.