-
All
-
Raw Material
Dynoadd by Dynea - Dynoadd F-1 is a general-purpose flow, levelling and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing, orange peel and pinholes are eliminated.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-100 is a flow and wetting additive with high compatibility for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing, orange peel and pinholes are eliminated.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-101 is a levelling additive, suitable for more polar systems including UV-coatings. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing, orange peel and pinholes are eliminated.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-102 is a flow and levelling additive with enhanced anti-foam properties for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd F-102 provides a good balance of flow and defoaming properties in a wide range of formulations.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-201 is a modified acrylic flow and levelling additive with balanced defoaming properties. It effectively controls surface tension in solvent based coating systems. Addition contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-203 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Addition of this product gives strong foam preventing effect as well as deairation. It will also have a positive contribution to flow and leveling and substrate wetting. It can be used in combination with other Dynoadd® products such as Dynoadd® F-1.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-300 is food contact compliant flow and wetting additive with high compatibility for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing, orange peel and pinholes are eliminated.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-3B is a food contact compliant flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-404 is a siloxane modified flow and levelling additive that effectively controls surface tension in solvent based coating systems. It gives excellent flow, levelling and overspray cratering resistance to spray applied coatings.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-601 is a substrate wetting and levelling additive intended for water-borne formulations. Addition of Dynoadd F-601 gives improved substrate wetting, flow and levelling. Craters, pinholes, fisheyes and other surface imperfections are eliminated or substantially reduced.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-602 is a levelling, wetting and anti-pinhole additive intended for water-borne formulations. Addition of Dynoadd F-602 gives improved substrate wetting and flow. Craters, pinholes, fisheyes and other surface imperfections are eliminated or substantially reduced.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-705 It is a highly effective anti-foam non-silicone polymers concentrate for solvent borne and UV-formulations. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the coating.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-706 is a non-silicone polymeric anti-foam and air release additive. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It does not negatively influence the appearance of the coating.
-
Raw Material
Dynoadd by Dynea - Dynoadd F-707 is a non-silicone polymeric anti-foam additive for solvent-borne coatings. It is effective in preventing generation of foam, and it is particularly effective in air release, thus reducing popping. It controls surface tension in solvent-based systems. Small additions may also contribute to improved flow and a reduction in surface imperfections like craters and orange peel.
-
Raw Material
Dynoadd by Dynea - Dynoadd P-506 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Particle size is 6 microns.
-
Raw Material
Dynoadd by Dynea - Dynoadd P-510 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Particle size is 10 microns.
-
Raw Material
Dynoadd by Dynea - Dynoadd P-515 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Particle size is 15 microns.
-
Raw Material
Dynoadd by Dynea - Dynoadd P-520 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Particle size is 20 microns.
-
Raw Material
Dynoadd by Dynea - Dynoadd P-530 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Particle size is 30 microns.
-
Raw Material
Dynoadd by Dynea - Dynoadd P-540 is monodisperse, spherical particle-additive providing especially fine and uniformly textured films. The particles have an extremely narrow particle size distribution, ensuring that every particle gives the desired effect, resulting in lower addition rates than competing technologies. They can give improved scratch resistance and impart a permanent slip improvement. Particle size is 40 microns.