-
All
ArtigoRaw Material
-
Raw Material
Air Products - Epoxy Additives and Resins - Low-colour, low-viscosity unmodified cycloaliphatic amine. Improved fracture toughness. Used in filament winding, wet lay-up laminating, casting, RIM, and pultrusion.
-
Raw Material
Air Products - Epoxy Additives and Resins - Modified polyamide curing agent designed specifically for interior pipeline solvent borne epoxy coatings where high performance and cost effectiveness are key requirements.
-
Raw Material
Air Products - Epoxy Additives and Resins - Polyamide providing high gloss, flexibility, hardness, and reverse impact resistance. No induction required. Used in high-solids coatings and primers, concrete coatings, sealants and putties, and pool paints.
-
Raw Material
Air Products - Epoxy Additives and Resins - 70% weight solution of ANCAMIDE™ 220 curing agent in Xylene. Used in solvent borne maintenance coatings, primers, sealers, and concrete coatings. Complies with FDA 21 CFR 175.105.
-
Raw Material
Air Products - Epoxy Additives and Resins - Polyamide providing excellent high-gloss film formation and fast dry with no induction time. Gives hard films with very good solvent and corrosion resistance. Best chemical resistance of polyamides. Used in high-solids marine and maintenance coatings and concrete primers and coatings.
-
Raw Material
Air Products - Epoxy Additives and Resins - Amidoamine offering long pot life with good thin film set time, excellent film formation. Very good solvent, blush, and corrosion resistance. Used in high-performance coatings, and tank linings. Allows high-solids or 100%-solids formulations for base coats or primers.
-
Raw Material
Air Products - Epoxy Additives and Resins - Plasticizer-free amidoamine with long pot-life and excellent blush resistance. Excellent hardness development and good resistance to aqueous reagents. Used in high and 100%-solids coatings and primers. Complies with FDA 21 CFR 175.300.
-
Raw Material
Air Products - Epoxy Additives and Resins - Very low-viscosity, plasticizer-free amidoamine with long pot life and good blush resistance. Develops good adhesion to concrete and rusty metal. Excellent humidity and corrosion resistance. Used in penetrating primer clear coats for poorly prepared surfaces and 100% solids, sprayed coatings.
-
Raw Material
Air Products - Epoxy Additives and Resins - Low-viscosity polyamide that exhibits fast cure at low temperatures. Low residual amine content. Exhibits high gloss, excellent hardness and flexibility. Used in high-solids, anticorrosive coatings for marine and industrial maintenance use and in military equipment coatings.
-
Raw Material
Air Products - Epoxy Additives and Resins - Standard medium-viscosity polyamide. Offers improved reactivity, chemical resistance and/or reduction in viscosity. Used in coatings, sealants, cable-jointing compounds, and adhesives. Complies with FDA 21 CFR 175.300 and 21 CFR 175.105.
-
Raw Material
Air Products - Epoxy Additives and Resins - Standard high Imidazole-content polyamide with lower viscosity. Used in high-solids coatings, adhesives, sealants, and putties.
-
Raw Material
Air Products - Epoxy Additives and Resins - Amidoamine providing good adhesion to concrete. Used in concrete primers and coatings, grouts, concrete repair, flooring, river stone mortars, electrical encapsulation, tooling, and general-purpose adhesives. Complies with FDA 21 CFR 175.300 and 21 CFR 175.105.
-
Raw Material
Air Products - Epoxy Additives and Resins - Amidoamine offering good cure under humid conditions. Very good adhesion to concrete and good chemical resistance. Used in trowelable flooring, concrete coatings and primers, patching compounds, and concrete adhesives.
-
Raw Material
Air Products - Epoxy Additives and Resins - Versatile polyamide providing outstanding flexibility/peel strength, excellent thermal shock resistance, good electrical properties. Excellent adhesion to a wide variety of substrates. Used in electrical potting and encapsulation, two-component adhesives, coatings, construction, and composites.
-
Raw Material
Air Products - Epoxy Additives and Resins - Modified cycloaliphatic amine that offers good colour and surface appearance with good resistance to carbonation (water-spotting). Used in floor primers, paints, self-levelling and mortar floors. Can also be used in solvent-free and high-solids coatings.
-
Raw Material
Air Products - Epoxy Additives and Resins - Modified aliphatic amine offering a good balance of chemical and solvent resistance. Compatible with multi-functional epoxy resins for improved chemical and hot water resistance. Used in high-solids and solvent-free coatings, tank linings, adhesives, and as an accelerator for amidoamines.
-
Raw Material
Air Products - Epoxy Additives and Resins - Modified cycloaliphatic amine that offers good colour and colour stability. Provides high-gloss, non-blushing films with good chemical resistance. Used in solvent-free and high-solids coatings, gel coats, and self-levelling flooring.
-
Raw Material
Air Products - Epoxy Additives and Resins - Modified aliphatic amine that combines low viscosity with good chemical resistance. Used in trowelable flooring, grouts, and as an accelerator and viscosity reducer for other amines.
-
Raw Material
Air Products - Epoxy Additives and Resins - Low-viscosity modified aliphatic amine. Rapid cure at low temperatures. High-gloss films with better resistance to carbamation, even under high humidity. Used in solvent-free and high-solids coatings, concrete patching compounds, crack injection, and as an excellent accelerator for other amines.
-
Raw Material
Air Products - Epoxy Additives and Resins - Low viscosity unmodified cycloaliphatic amine alternative to aromatic diamines with improved tensile strength, toughness, and elongation. Used in filament winding, casting, potting, and wet lay-up laminating for tooling and general industrial applications.