Paint & Coatings > Latin America

Additives > Weather Resistant Additives

AQUABEAD® 270E
(raw materials)

Micro Powders, Inc. - Anionic/nonionic wax emulsion specifically formulated for aqueous exterior stains, sealers, paints and coatings.

AQUABEAD® 325E
(raw materials)

Micro Powders, Inc. - Anionic wax emulsion specifically formulated for aqueous exterior stains, sealers, paints and coatings.

AQUABEAD® 519
(raw materials)

Micro Powders, Inc. - Specially formulated wax polymer which will impart immediate and long-lasting water repellency when added to stains, paints and coatings.

AQUABEAD® 916
(raw materials)

Micro Powders, Inc. - Specially formulated wax polymer which will impart immediate and long-lasting water repellency when added to stains, paints and coatings.

AQUABED® 270E
(raw materials)

Micro Powders, Inc. - Anionic/nonionic wax emulsion specifically formulated for aqueous exterior stains, sealers, paints and coatings.

AQUAKLEAN 401
(raw materials)

Micro Powders, Inc. - This is an anionic/nonionic aqueous wax emulsion with a viscosity of 300 cPs specifically formulated for architectural interior paints and exterior stains, sealers, paints and coatings. It provides excellent scrub-ability and burnish resistance as well as initial and long lasting water beadings, weather and moisture resistance.

AQUAKLEAN 402
(raw materials)

Micro Powders, Inc. - This is an anionic/nonionic aqueous wax emulsion with a viscosity of 500 cPs specifically formulated for architectural interior paints and exterior stains, sealers, paints and coatings. It provides excellent scrub-ability and burnish resistance as well as initial and long lasting water beadings, weather and moisture resistance.

AQUAKLEAN 403
(raw materials)

Micro Powders, Inc. - This is an anionic/nonionic aqueous wax emulsion with a viscosity of 100 cPs specifically formulated for architectural interior paints and exterior stains, sealers, paints and coatings. It provides excellent scrub-ability and burnish resistance as well as initial and long lasting water beadings, weather and moisture resistance.

BYK®-370
(raw materials)

BYK - Reactive silicone surface additive. Solution of a polyester modified hydroxy functional polydimethylsiloxane.

BYK®-371
(raw materials)

BYK - Reactive silicone surface additive. Solution of an acrylfunctional polyester modified polydimethylsiloxane.

BYK®-373
(raw materials)

BYK - Reactive silicone surface additive. Solution of a polyether modified hydroxy functional polydimethylsiloxane.

BYK®-375
(raw materials)

BYK - Reactive silicone surface additive. Solution of a polyether-polyester modified hydroxy functional polydimethylsiloxane.

MICROSPERSION 22-35
(raw materials)

Micro Powders, Inc. - Controlled dispersion of a basic straight chain hydrocarbon synthetic wax produced by the Fischer-Tropsch process dispersed at 35%.

MICROSPERSION 22-50
(raw materials)

Micro Powders, Inc. - Controlled dispersion of a basic straight chain hydrocarbon synthetic wax produced by the Fischer-Tropsch process dispersed at 50%.

NICRON® 674
(raw materials)

Rio Tinto Minerals - Platy, ultra fine, high purity talc that is insoluble in mineral acids, hydrophobic and non-abrasive to compounding and application equipment. Used in interior/exterior coatings, adhesives, sealants and thermoplastic polymers.

PHC587 WEATHERABLE ABRASION-RESISTANT PRIMERLESS SILICONE HARD COAT
(raw materials)

Momentive Performance Materials - It is a clear, non-yellowing silicone coating that can offer optimal protection against deterioration from weather, including ultraviolet rays, heat, cold, rain, snow and ice. It also resist damage from sand and dirt.

UVHC3000
(raw materials)

Momentive Performance Materials - It is a clear, solvent-based, UV radiation cured coating which provides protection to parts made out of polycarbonate against abrasion, chemical damage, degradation caused by ultraviolet radiation and weathering.