Caulinos

• All  

• BILT-PLATES® 156

  Raw Material

  R.T. Vanderbilt Company, Inc. - Hydrated aluminum silicate. For use in coatings such as primers, alkyd flats, and latex paints. Good for titanium dioxide extension in coatings that do not require a high brightness extender.

• CC-7071

  Raw Material

  Lubrizol Advanced Materials, Inc. - It is an opaque-tan free flow paste kaolin clay containing ink extender that maintains tack, solids, and gloss. It is recommended for heatset inks, no heat web inks and forms inks.

• DIXIE CLAY®

  Raw Material

  R.T. Vanderbilt Company, Inc. - Hydrated aluminum silicate, kaolin. Reinforcing filler and extender for all elastomers and latexes

• KAMIN™ 2000C

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - This is KaMin's highest brightness, finest particle size, calcined kaolin clay. It has high oil absorption and water demand. It incorporates readily into solvent and water-borne coatings and inks, where it imparts sheen control and maximum TiO2 extension, tint strength, and brightness (whiteness). Typical use: inks and flat architectural coatings.

• KAMIN™ 35

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - A general purpose, medium brightness, coarse particle size filler with low oil and water demand. It's used primarily in adhesives, paints, inks, or where low binder demand is important. It provides holdout, barrier properties, reduced sheen, and minimal viscosity increase to coatings and inks. It's suitable for solvent, solvent-free and water based systems.

• KAMIN™ 35B

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - A general purpose, medium brightness, coarse particle size filler with low oil and water demand. It's used principally in water-based adhesives, paints, inks or where low surface area is important.

• KAMIN™ 611

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - KaMin 611 is a high brightness, fine particle size, “naturally delaminated” kaolin clay with moderate water demand. KaMin 611 is ideally suited for water-borne paint, ink, and adhesive applications where high gloss, holdout, and controlled rheology are important.

• KAMIN™ 70C

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - KaMin 70C is a high brightness, medium particle size, calcined kaolin. It has moderate oil absorption and water demand. KaMin 70C incorporates readily into solvent and water-borne coatings, where it imparts TiO2 extension, brightness (whiteness), scrub resistance and sheen control. KaMin 70C is the workhorse of the industry. Typical use: flat and low sheen architectural coatings.

• KAMIN™ 80

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - KaMin 80 is an economical, general purpose water-washed kaolin, with intermediate brightness. It is suitable for use in water-borne, solvent-borne and solvent-free paint, ink, and adhesive applications.

• KAMIN™ 80B

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - KaMin 80B is an economical, general purpose water washed kaolin, with intermediate brightness. It is suitable for use in water-borne paint, ink, and adhesive applications.

• KAMIN™ 90

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - KaMin 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin 90 is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important.

• KAMIN™ 90B

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - KaMin 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin 90B is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important.

• KAMIN™ 95 SLURRY

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - KaMin 95 is a medium-brightness, kaolin clay filler for paints, adhesives and related industries. It has a neutral pH, is acid-resistant and environmentally friendly.

• KAMIN™ HG

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - KaMin HG kaolin clay is an economical, general purpose, water-washed kaolin with fine particle size and intermediate brightness. It is suitable for water borne paint, ink and adhesive applications.

• KAMIN™ HG90

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - KaMin HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints. KaMin HG90 is ideally suited for water-borne paint and ink applications, where high brightness and whiteness are important.

• KAMIN™ TEK 2001

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - KaMin TEK 2001 is an ultra-fine particle size, high brightness water-washed kaolin clay, designed as an excellent TiO2 extender for paints, coatings and inks. KaMin TEK 2001 is easily dispersible in water-based systems using high-speed dispersers. The uniform, narrow particle size distribution and excellent color makes it the preferred extender for gloss latex paints where optimum TiO2 spacing is desired without adverse effect on gloss.

• MCNAMEE® CLAY

  Raw Material

  R.T. Vanderbilt Company, Inc. - Hydrated aluminum silicate, kaolin. Low cost reinforcer and inert filler for all elastomers

• PEERLESS® CLAY NO. 1

  Raw Material

  R.T. Vanderbilt Company, Inc. - For use as extender pigments in coatings.

• PEERLESS® CLAY NO. 3

  Raw Material

  R.T. Vanderbilt Company, Inc. - For use as extender pigments in coatings.

• POLYGLOSS® 90

  Raw Material

  KaMin, LLC (formerly Huber Kaolin) - Polygloss 90 is an ultra-fine particle size, high brightness kaolin, designed to provide ease of dispersion and improved gloss in both aqueous and solvent-borne coatings and inks. Polygloss 90 specialty kaolin contributes to improved opacity through efficient TiO2 spacing. Polygloss 90 can be loaded to higher PVC values than standard extender pigments, without decreasing gloss and with minimal effect on viscosity.