Bactéricides / Fongicides / Conservateurs

• All  

• ISCACIDE AL

  Matière Première

  ISCA UK - A low toxicity biocide that provides continuous anti-bacterial and anti-fungal protection in a variety of water-based systems.

• ISCACIDE SMI

  Matière Première

  ISCA UK - A low toxicity biocide that provides continuous anti-bacterial and anti-fungal protection in a variety of water-based systems.

• JMAC COMPOSITE PG

  Matière Première

  Clariant - Coatings & Construction Chemicals - A low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state.

• JMAC LP 1

  Matière Première

  Clariant - Coatings & Construction Chemicals - A low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state.

• JMAC LP 10

  Matière Première

  Clariant - Coatings & Construction Chemicals - A low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state.

• MERGAL® 399

  Matière Première

  Troy Chemie GmbH - Highly effective, broad-spectrum, liquid bacterial control agent designed for use in various water based systems. The active ingredients are listed in the cosmetic list and the product does not bear any labeling.

• MERGAL® 723K

  Matière Première

  Troy Chemie GmbH - Formaldehyde free, broad-spectrum, liquid preservative designed to inhibit the growth of bacteria, yeast, and fungi in aqueous systems.

• MERGAL® 731

  Matière Première

  Troy Chemie GmbH - Fast-acting, effective, broad-spectrum liquid in-can preservative designed to inhibit the growth of bacteria, yeast and fungi in aqueous systems. It provides an excellent head-space protection. All active ingredients are listed on the cosmetic list.

• MERGAL® 753

  Matière Première

  Troy Chemie GmbH - Formaldehyde-free, broad-spectrum in-can preservative for waterborne systems and Metalworking-Fluids. It is a highly concentrated, ecologically responsible, free-flowing, VOC-free dispersion product.

• MERGAL® 758

  Matière Première

  Troy Chemie GmbH - Formaldehyde-free, broad-spectrum in-can preservative for waterborne systems and for Metalworking-Fluids as a post-treatment. It is an aqueous, broad spectrum product used to prevent deterioration and degradation caused by bacteria, fungi and yeast. It is a free-flowing, VOC free dipersion.

• MERGAL® 759

  Matière Première

  Troy Chemie GmbH - Broad-spectrum in-can preservative for aqueous systems. It is used to prevent deterioration and degradation caused by bacteria, fungi and yeast.

• MERGAL® 786

  Matière Première

  Troy Chemie GmbH - Formaldehyde-free, broad-spectrum in-can preservative for waterborne systems and Metalworking Fuilds. It is a highly concentrated, ecologically responsible, VOC-free, water-based, free-flowing dispersion product used to prevent deterioration and degradation caused by bacteria, fungi and yeast. The content of active ingredients of Mergal 786 is higher than typical products based on MIT and BIT. The product therefore requires lower use-levels than currently available products.

• MERGAL® KM90

  Matière Première

  Troy Chemie GmbH - Formaldehyde free, broad-spectrum, liquid preservative designed to inhibit the growth of bacteria, yeast, and fungi in aqueous systems, specifically for native glues, leather finishes and Metalworking-Fluids.

• MERGAL® V684K

  Matière Première

  Troy Chemie GmbH - Highly cost-effective, fast acting, effective, broad-spectrum liquid in-can preservative designed to inhibit the growth of bacteria, yeast, and fungi in aqueous systems. It provides an excellent head-space protection. This product is also useful in Metalworking-Fluids (MWF) as a post-treatment.

• NIPACIDE BCP

  Matière Première

  Clariant - Coatings & Construction Chemicals - A low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state.

• NIPACIDE BIT

  Matière Première

  Clariant - Coatings & Construction Chemicals - An low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state.

• NIPACIDE BIT 10

  Matière Première

  Clariant - Coatings & Construction Chemicals - A glycol based, low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state.

• NIPACIDE BIT 20

  Matière Première

  Clariant - Coatings & Construction Chemicals - A glycol based, low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state.

• NIPACIDE BIT 20 DPG

  Matière Première

  Clariant - Coatings & Construction Chemicals - A glycol based, low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state.

• NIPACIDE BIT AS

  Matière Première

  Clariant - Coatings & Construction Chemicals - A water-based, low toxicity biocide specifically developed for the complete microbiological protection of water based products against bacterial and fungal spoilage in the wet state.