Additifs de matité

• All  

• A-C® 1702

  Matière Première

  Honeywell Specialty Additives - A PE homopolymer for use in hot melt adhesives, cable fill, candles, lithography, and as a thickening agent and viscosity modifier.

• A-C® 325

  Matière Première

  Honeywell Specialty Additives - High density oxidized PE homopolymer that emulsifies easily with anionic and cationic surfactants. Used in overprint varnish.

• A-C® 330

  Matière Première

  Honeywell Specialty Additives - High density oxidized PE homopolymer that emulsifies easily with anionic and cationic surfactants. Used in overprint varnish.

• A-C® 392

  Matière Première

  Honeywell Specialty Additives - High density oxidized PE homopolymer that emulsifies easily with anionic and cationic surfactants. Used in overprint varnish.

• A-C® 597A

  Matière Première

  Honeywell Specialty Additives - Propylene-maleic anhydride copolymer products are used in applications including inks and overprint varnishes.

• A-C® 6

  Matière Première

  Honeywell Specialty Additives - A PE homopolymer designed for use in flexographic and lithographic applications.

• A-C® 8

  Matière Première

  Honeywell Specialty Additives - A PE homopolymer designed for use in publication graveur and lithographic applications.

• A-C® 810A

  Matière Première

  Honeywell Specialty Additives - A PE homopolymer available in many grades differing in softening point, viscosity, hardness, density and molecular weight. Applications in lithography.

• A-C® 9

  Matière Première

  Honeywell Specialty Additives - A PE homopolymer available in many grades differing in softening point, viscosity, hardness, density and molecular weight. Applications include lithography and publication graveur.

• A-C® 9A

  Matière Première

  Honeywell Specialty Additives - A PE homopolymer available in many grades differing in softening point, viscosity, hardness, density and molecular weight. Applications in lithography.

• AERODISP® W 1824 (K328)

  Matière Première

  Evonik Degussa GmbH - Aerosil - A low thickening aqueous based Aerosil® dispersion with a solids content of 24%.

• AERODISP® W 1836 (K342)

  Matière Première

  Evonik Degussa GmbH - Aerosil - A low thickening, highly filled aqueous based Aerosil® dispersion.

• AEROSIL® TT 600

  Matière Première

  Evonik Degussa GmbH - Aerosil - A hydrophilic fumed silica manufactured according to the Aerosil® process and showing a particularly high degree of agglomeration. It is used in PET-films, paints and coatings and as a catalyst substrate.

• CERAFLOUR® 920

  Matière Première

  BYK - Micronized organic polymer for matting water-borne and solvent-borne paint systems. Micronized organic polymer.

• FLUORO C-369

  Matière Première

  Shamrock Technologies b.v.b.a. - A special micronized PTFE grade for use in powder coatings. It may be used alone or in combination with other waxes to maximize abrasion resistance and slip (lubricity) without affecting the surface profile of the finished coating.

• NONSKID 59

  Matière Première

  Shamrock Technologies b.v.b.a. - A micronized, modified polypropylene wax. Designed to impart non-skid properties in overprint varnishes. Is non-abrasive and, being a wax, will deform under extreme pressure to give some measure of rub resistance.

• POLYWAX® 1000

  Matière Première

  Baker Petrolite - These are fully saturated homopolymers of ethylene that have high degrees of linearity and crystallinity. These synthetic waxes have narrow molecular weight distributions and narrow melt distributions. They also have low melt viscosities and are hard, even at elevated temperatures. This has a melting point of 235 degrees(F).

• POLYWAX® 2000

  Matière Première

  Baker Petrolite - These are fully saturated homopolymers of ethylene that have high degrees of linearity and crystallinity. These synthetic waxes have narrow molecular weight distributions and narrow melt distributions. They also have low melt viscosities and are hard, even at elevated temperatures. This has a melting point of 259 degrees(F).

• POLYWAX® 3000

  Matière Première

  Baker Petrolite - These are fully saturated homopolymers of ethylene that have high degrees of linearity and crystallinity. These synthetic waxes have narrow molecular weight distributions and narrow melt distributions. They also have low melt viscosities and are hard, even at elevated temperatures. This has a melting point of 265 degrees(F).

• POLYWAX® 400

  Matière Première

  Baker Petrolite - These are fully saturated homopolymers of ethylene that have high degrees of linearity and crystallinity. These synthetic waxes have narrow molecular weight distributions and narrow melt distributions. They also have low melt viscosities and are hard, even at elevated temperatures. This has a melting point of 178 degrees(F).