Additifs anticratères

• All  

• BYK®-333 FOR INKS

  Matière Première

  BYK - A silicone surface additive with a strong reduction of surface tension of printing inks and overprint varnishes. Polyether modified polydimethylsiloxane.

• BYK®-341 FOR INKS

  Matière Première

  BYK - A silicone surface additive with a strong reduction of surface tension of printing inks and overprint varnishes. Solution of a polyether modified polydimethylsiloxane

• BYK®-354 FOR INKS

  Matière Première

  BYK - Acrylic leveling additives for printing inks and overprint varnishes. Solution of a polyacrylate.

• DYNOADD® F-1

  Matière Première

  Dynoadd by Dynea - Dynoadd F-1 is a general-purpose flow, levelling and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing, orange peel and pinholes are eliminated.

• DYNOADD® F-100

  Matière Première

  Dynoadd by Dynea - Dynoadd F-100 is a flow and wetting additive with high compatibility for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing, orange peel and pinholes are eliminated.

• DYNOADD® F-101

  Matière Première

  Dynoadd by Dynea - Dynoadd F-101 is a levelling additive, suitable for more polar systems including UV-coatings. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing, orange peel and pinholes are eliminated.

• DYNOADD® F-102

  Matière Première

  Dynoadd by Dynea - Dynoadd F-102 is a flow and levelling additive with enhanced anti-foam properties for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd F-102 provides a good balance of flow and defoaming properties in a wide range of formulations.

• DYNOADD® F-201

  Matière Première

  Dynoadd by Dynea - Dynoadd F-201 is a modified acrylic flow and levelling additive with balanced defoaming properties. It effectively controls surface tension in solvent based coating systems. Addition contribute to improved flow, and a reduction in surface imperfections like craters, orange peel and pinholes.

• DYNOADD® F-300

  Matière Première

  Dynoadd by Dynea - Dynoadd F-300 is food contact compliant flow and wetting additive with high compatibility for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing, orange peel and pinholes are eliminated.

• DYNOADD® F-3B

  Matière Première

  Dynoadd by Dynea - Dynoadd F-3B is a food contact compliant flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated.

• DYNOADD® F-404

  Matière Première

  Dynoadd by Dynea - Dynoadd F-404 is a siloxane modified flow and levelling additive that effectively controls surface tension in solvent based coating systems. It gives excellent flow, levelling and overspray cratering resistance to spray applied coatings.

• DYNOADD® F-601

  Matière Première

  Dynoadd by Dynea - Dynoadd F-601 is a substrate wetting and levelling additive intended for water-borne formulations. Addition of Dynoadd F-601 gives improved substrate wetting, flow and levelling. Craters, pinholes, fisheyes and other surface imperfections are eliminated or substantially reduced.

• DYNOADD® F-602

  Matière Première

  Dynoadd by Dynea - Dynoadd F-602 is a levelling, wetting and anti-pinhole additive intended for water-borne formulations. Addition of Dynoadd F-602 gives improved substrate wetting and flow. Craters, pinholes, fisheyes and other surface imperfections are eliminated or substantially reduced.

• TEGO® FLOW ATF 2

  Matière Première

  Evonik Tego Chemie GmbH - Anti-crater and flow additive.

• WORLÉEADD 327

  Matière Première

  Worlée-Chemie G.m.b.H. - A silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings.

• WORLÉEADD 330

  Matière Première

  Worlée-Chemie G.m.b.H. - A silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties.

• WORLÉEADD 333

  Matière Première

  Worlée-Chemie G.m.b.H. - A silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties.

• WORLÉEADD 356

  Matière Première

  Worlée-Chemie G.m.b.H. - A modified silicone solution used to improve the characteristics of solvent based paints and printing inks.